Hot-selling gasoline trimmer tree pruner hedge trimmer
Petrol trimmer/hedge trimmer parameter introduction:
Petrol trimmer/hedge trimmer use: suitable for tea pruning, parks, gardens, roadside hedges and other gardens The landscaping is professionally trimmed. Generally speaking, a hedge trimmer refers to a hedge trimmer that relies on a small gasoline engine to drive the blade to cut and rotate. Currently, the hedge trimmer is divided into a single-edged hedge trimmer and a double-edged hedge trimmer
Dimensions: **
Net weight:
Speed: (r/)
Displacement:.
Applicable objects: lawns, tea trees, vegetables, roadside hedges
Six key points for the use and maintenance of gasoline trimmers/hedge trimmers:
1. Operation Key points for use:
Please read the instruction manual carefully before use. And be familiar with the mechanical structure and performance, master the power on and off procedures, blade gap adjustment, precautions and operating essentials.
. The fuel used in the machine tool is to use gasoline and special engine oil for two-stroke gasoline engines, and prepare and mix them evenly according to the volume ratio of: before use. It is not allowed to use substitute gasoline and engine oil or change the ratio of gasoline and engine oil.
. Mechanical starting: Before starting, press the hand oil pump several times to let the fuel enter the carburetor and discharge the air. Then open the throttle and close the damper appropriately. Press the gasoline engine firmly and pull the starting rope. After starting, open the choke and gradually increase the throttle to make it run normally and then start working.
When stopping, first put the accelerator to the low speed position and then turn off the gasoline engine. Note that the gasoline engine cannot be trimmed when running at low speed, nor can it be stopped suddenly when running at high speed to prevent damage to the engine parts.
When using a two-person pruning machine, the handle of the machine should be adjusted to the best position according to the height of the person and the height and width of the tea tree rows before cutting.
Pay attention to the safety of people and machines when working. Operators and support personnel must work closely together. When making a U-turn, changing lines, or other non-effective operations, turn down the throttle and stop the blade from running to prevent injury. Be sure to shut down when taking a break. When working, great attention should be paid to metal and hard objects on the tea tree, which should be removed regularly or in advance to avoid damaging the cutting tools.
2. Maintenance points for gasoline trimmers/hedge trimmers:
All parts of the machine should be carefully inspected before, during and after use. If parts are found to be damaged and fasteners are loose or fallen off, they should be replaced and adjusted in time. Do not allow machines to operate with defects or missing parts.
The blade should be lubricated with engine oil every working hour. Add calcium complex grease to the gearbox every hour of use.
. The maximum pruning diameter of the pruning machine should not exceed millimeters. If you cut a thick branch or foreign object during operation and feel the machine makes abnormal sound and vibrates, you should quickly shut down the machine and expel the foreign object.
Clean the air filter element with detergent or washing powder every working hour, squeeze the sponge, squeeze it dry and dry it in the sun. Clean the spark plug carbon deposits after every working hour and replace the fuel filter once every working month
Clean the body after daily use, wash the tea juice on the blade with clean water, wipe it dry, and then inject engine oil into the oil filling hole.
When the machine is parked for a long time, dust and debris on the surface of the machine body should be removed. Drain the fuel from the tank. Remove the spark plug, remove the carbon deposits, inject a few drops of clean engine oil into the cylinder, and gently pull the starter a few times to lubricate the engine oil to the cylinder wall. Install the spark plug, package it and store it in a dry place.
Contact: Jiang Xinfeng
Telephone:
Mobile:
:
Address: Beautiful Huangzhuang Industrial Park, Jining City
The latest products and the lowest price gasoline Trimmers/hedge trimmers are welcome to buy!
Hedge trimmer, gasoline trimmer, tree pruner manufacturer wholesale